E-MU PIPEline Wireless Transmitter/Receiver System
Thiết bị truyền âm thanh không dây với chất lượng cao, có thể sử dụng với nhạc cụ như đàn ghi ta, keyboard trong biều diễn hoặc bất kỳ thiết bị audio nào. Bạn cũng có thể sử dụng PIPEline nối máy iPod/Mp3 player của bạn với hệ thống âm thanh trong phòng khách mà không cần đi dây. Khoảng cách xa đến 15m
EMU PIPElines dùng sóng RF 3 băng tần phát tín hiệu độ trễ cực thấp. Với khả năng nhận tín hiệu trong giải tần 20Hz-20kHz +/- 0.15dB, bộ phát nhận đường vào giắc cắm 3.5mm hoặc đường RCA truyền thống. Tất nhiên bạn cũng có đường ra tướng ứng. Chất lượng âm thanh EMU công bố bảo đảm hơn hẳn chất lượng CD. Pin hoạt động trong khoảng 6h liên tục giúp cho bạn có thể hoàn toàn thoải mái biểu diễn trên sân khấu.

The E-MU PIPEline wireless transmitter/receiver system from E-MU Systems frees you from the tyranny of audio cables without sacrificing audio quality. The PIPEline can be used as a wireless transceiver for your guitar or keyboard, or as the basis of a wireless In-Ear monitoring system for your band. Because latency is so critical in music performance, PIPEline has a minimal delay of only 5.5ms so it won't interfere with the feel of your music.
With PIPEline connected to your instrument, you'll be able to move freely in a 15 meter range from the receiver. If your other band mates want to join the wireless revolution, they can, because PIPEline has three independent stereo channels. Each instrument stays completely independent with zero crosstalk.
Have you always wanted an In-Ear monitoring system, but couldn't justify the high price? PIPEline is the perfect solution for low-cost In-Ear monitoring. Because PIPEline has three channels, you can have three separate stereo monitor mixes, or one transmitter can send a group mix to multiple receivers.
PIPEline's Audio quality is superb with no-compression and a 48kHz sample rate (better than CD). Encryption key handshaking between transmitter and receiver eliminates the possibility of picking up other wireless sources.
Because PIPEline works with ANY audio device, you can wirelessly connect any of your other audio gear. For example, you could connect your iPod/Mp3 player (or computer) to your stereo system, or put remote speakers in another room of your house WITHOUT the hassle of routing speaker wires.
E-MU PIPEline features:
 |
 |
 |
Mobile wireless transmit or receive Each Pipeline can be configured as a transmitter or receiver for ultimate flexibility |
 |
 |
 |
Better than CD Quality Digital Audio Audiophile quality sound with 48kHz sample rate and 96dB signal-to-noise ratio. |
 |
 |
 |
Low Latency Unlike other wireless transceivers with long latency of 20ms, the E-MU pipeline offers low latency so essential for live music applications. 5.5ms in dedicated pairing mode, and 10ms in broadcast mode. |
 |
 |
 |
15 Meter (49 feet) Range Pipeline has Extended Audio Range Reception (EARR) to give you even more freedom |
 |
 |
 |
Long Battery Life (up to 10 hrs receive) The rechargeable battery lasts up to 10 hours in receive mode and 6 hours in transmit mode. Because each unit can be either a transmitter or receiver, you can swap units between sets and always have a fresh charge. |
 |
 |
 |
Analog/Digital inputs or outputs The audio Flexi-Jacks can be configured as inputs or outputs and they can also be setup to send or receive analog or digital S/PDIF - whatever type of connections you need. |
 |
 |
 |
Broadcast mode allows one transmitter and multiple receivers In this mode, one transmitter can broadcast to multiple receivers. Pipeline to be used as an "In-Ear" monitor system for your band, or broadcast to a class of students using headphones. |
 |
 |
 |
Pairing mode connects one transmitter to one receiver In pairing mode, you can have up to three independent transmitter/receiver pairs. You could have three wireless instruments, or set up any three of the home applications. You could also use two channels for wireless instruments and use the third channel in broadcast mode for your In-Ear monitors. |
 |
 |
 |
Easy to setup and use |
 |
 |
 |
Power adapter/charger and cables included |
I/O Configuration
 |
 |
 |
Two RCA Flexi-Jacks can be configured either as inputs or outputs |
 |
 |
 |
The two RCA Flexi-Jacks can also be configured either as analog or digital (S/PDIF 48kHz) |
Technical Specifications
Connectivity
 |
 |
 |
Audio Line In/Out - 3.5 mm (1/8") Stereo jack |
 |
 |
 |
S/PDIF 48kHz or RCA Audio Line In/Out |
Audio Performance
 |
 |
 |
Frequency Response: 20Hz-20kHz +/- 0.15dB |
 |
 |
 |
Signal-to-Noise Ratio (SNR) 98dB (typical) |
 |
 |
 |
Latency: 5.5ms in Dedicated Pairing Mode, 10ms in Broadcast Mode |
Rechargeable Battery
 |
 |
 |
Battery Life: 5 to 8 hours (typical) |
 |
 |
 |
Charge Time: 3 hours (typical) |
Power Adapter
 |
 |
 |
Supply Voltage: 5V |
 |
 |
 |
Current: 1A |
 |
 |
 |
Power: 5W |
 |
 |
 |
Tip=Positive |
Radio Frequency
 |
 |
 |
Operating RF range: 2400 - 2483.5 MHz |
 |
 |
 |
Number of RF channels: 3 |
 |
 |
 |
RF transmitter power output: 16 dBm (typical) |
Retail Box Contents
 |
 |
 |
PIPEline transceiver module |
 |
 |
 |
Universal Power Adapter |
 |
 |
 |
Stereo 1/8" mini to dual mono RCA cable |
 |
 |
 |
¼" male mono to dual mono RCA cable |
 |
 |
 |
Silicon skin with belt/strap clip |
 |
 |
 |
User's Guide |
Minimum System Requirements
 |
 |
 |
AC Power 100/240V |
 |
 |
 |
(2) PIPElines are required (transmitter & receiver) or (1) LONGboard/SHORTboard (with built-in PIPEline transmitter) and (1) PIPEline |
Download Hướng dẫn sử dụng tại đây